Hardware Model Specification

Ulike Air 10 Pro Diagnostics

Classification: IPL & Laser Epilation Tech Equipment

Hardware operational fault codes, protection alarms, LED blink sequences, and step-by-step diagnostic fixes for the Ulike Air 10 Pro.

2 Documented Faults • Full Multimeter & Safety Isolation Procedures

Indexed Fault Codes for Air 10 Pro

Step-by-step resolution manuals and root cause matrices

2 Codes

CODE E3 Severity: High Difficulty: Intermediate

Sapphire Cooling Sensor Cut-Off

Error E3 indicates an open-circuit, short-circuit, or anomalous temperature reading detected across the NTC thermistor embedded in the sapphire contact cooling head. To prevent thermal epidermal burns or Peltier cell failure, firmware halts pulse generation.

⏱ 25-35 Mins Troubleshoot Now →

CODE E2 Severity: Critical Difficulty: Advanced

Xenon Capacitor Charging Timeout

The main microcontroller triggered an E2 safety lockout due to the dual-lamp high-voltage photoflash capacitor failing to reach target operational potential (typically 380V-420V DC) within the maximum allowed charging window (exceeding 1200ms).

⏱ 30-45 Mins Troubleshoot Now →